Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Beverly Hills, CA
Garage door installation in Beverly Hills means working with homes that were built before standard door sizes existed, on lots that slope into canyons, under HOAs that review every visible change. We regularly install doors on 1920s Spanish Colonial estates with arched openings, on Mid-Century Modern homes with custom wood facades, and on newer spec builds with glass and steel systems. If you need a door that matches your home’s architecture rather than fighting it, call (877) 588-8251 and we’ll walk the property with you before quoting anything.
Why Beverly Hills Homes Are Different
Beverly Hills has one of the highest concentrations of celebrity-owned and historic estates in the country. That changes the work. A garage door here isn’t just a moving panel; it’s the first architectural element a visitor sees from the street. On the sweeping Spanish Colonial Revival homes north of Sunset Boulevard, garage openings are often arched or oversized, requiring custom fabrication rather than an off-the-shelf door. Homeowners in the flats south of Santa Monica Boulevard frequently live in original 1950s single-car garages too narrow for a modern SUV, which means retrofitting swing-out or side-sliding doors, a code-sensitive project we’ve handled repeatedly in the 90212 and 90210 ZIP codes.
The climate does its own damage. Intense sun on south- and west-facing driveways fades wood and vinyl fast, and heat warping on a dark steel door facing a canyon-facing slope is a real failure mode we see every summer. Winter rains, which do arrive in Beverly Hills, swell older wooden doors enough to bind them in their tracks. Weather-sealed tracks and UV-resistant finishes are a routine part of our installations here, not an upsell. And many of the homes are older enough that the permitting process involves the city’s strict residential design review, especially for any change visible from the street. We know which jobs trigger review and which don’t, and we prepare the paperwork accordingly.
Styles & brands we work with






Our Main Beverly Hills Services
Most Beverly Hills homeowners call us for one of two reasons: something broke and the car is stuck inside, or an opener failed after years of daily use on a heavy custom door. Both are jobs where brand-specific knowledge changes the outcome.
Garage Door Repair in Beverly Hills
Beverly Hills garage doors carry more weight than standard residential doors: solid wood facades, oversized panels, and custom hardware are common. When a spring lets go on a 400-pound door over a Ferrari, the repair needs to be precise, not improvised. We stock springs, cables, rollers, and track components for the door brands found throughout Beverly Hills, and we diagnose the failure before touching anything. From a snapped cable on a 1920s carriage house in 90210 to a bent track on a newer build in 90212, the work is the same: repair what failed, inspect what’s about to fail, and leave the door balanced and quiet. Full details are on our Garage Door Repair in Beverly Hills page.

Garage Door Opener Repair in Beverly Hills
Openers in Beverly Hills often pair a modern motor with a heavy, custom door, and that mismatch wears out gears, sprockets, and circuit boards faster than a builder-grade setup. We work on LiftMaster, Chamberlain, Genie, Craftsman, and Raynor openers every week, and we carry the common parts in our trucks. If your opener is grinding, reversing, or dead on a hillside property where the garage is the only way into the house, that’s a repair we can usually complete in one visit. See our Garage Door Opener Repair in Beverly Hills page for what’s involved and what it costs.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Beverly Hills
Garage door installation in Beverly Hills starts with the opening, not the catalog. Many homes in the flats and the hills have arched, oversized, or custom-shaped garage openings that predate standard door sizing by decades. And the sun exposure on south- and west-facing driveways means the finish we recommend has to survive years of direct UV load without fading or warping. We spec and install doors that fit the architecture, handle the climate, and open smoothly for years. Full detail is on our Garage Door Installation hub, but here’s what the job looks like in Beverly Hills specifically.
Garage Door Replacement
Signs you need it
The door is visibly sagging in the middle, panels are cracked or rotting, or you’re repairing it more than twice a year and it still runs rough.
What it costs in Beverly Hills
A full garage door replacement in Beverly Hills typically runs $700 to $2200 depending on material, size, and whether the opening is standard or custom.
How we do it
We measure the opening, check the framing and track condition, remove the old door, install the new one with matching hardware, and balance and test the full travel.
Garage Door Installation Service
Signs you need it
You’re building new, remodeling, or converting a carport, and there’s no existing door hardware to work from.
What it costs in Beverly Hills
New garage door installation in Beverly Hills falls in the $700 to $2200 range for the door and labor, with custom-arch or oversized work at the upper end.
How we do it
We spec the door around your opening, install the tracks, hang the door, set the springs, and finish with a complete balance and safety-reverse check.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, water pools inside the threshold after rain, or dust and leaves collect along the garage floor.
What it costs in Beverly Hills
Bottom seal replacement and weatherstripping installation in Beverly Hills runs $110 to $220 depending on the door width and current seal condition.
How we do it
We pull the old seal, clean the retainer channel, press in the new rubber or brush seal, and test the threshold for even contact across the full width.
What Garage Door Installation Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| New garage door installation | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
Custom openings, arched framing, and doors with decorative hardware or solid wood construction push toward the higher end. The price is quoted and agreed before any work starts, so the number we give you is the number on the invoice.
How long does a custom garage door installation take in Beverly Hills?
Most installations finish in one day, but a custom or arched Beverly Hills door that needs fabrication usually takes two to three weeks from order to install, and we’ll tell you the real timeline before you commit.
Will you handle the HOA or permit questions for a garage door in Beverly Hills?
We prepare the specs and documentation for your HOA or city review, and we’ve worked through the Beverly Hills residential design review process on historical and street-visible installs. Call (877) 588-8251 and we’ll tell you what applies to your property.
Brands We Service in Beverly Hills
We work on your brand, not just our preferred one. That means LiftMaster and Chamberlain openers, Clopay and Amarr doors, Wayne Dalton hardware, and Craftsman and Raynor systems are all normal service calls for us. We stock common parts locally so most Beverly Hills repairs don’t wait on a distributor shipment. Learn more about what we carry on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement | $250 – $500 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| New door installation | $700 – $2200 |
| Full garage door repair | $150 – $600 |
Beverly Hills prices run at the upper end of these ranges when the door is oversized, custom, or made of solid wood, all of which add weight and labor. Whatever the job, we quote the full price before we start, and that number doesn’t move unless the scope changes and you approve it first.
Neighborhoods We Serve in Beverly Hills
We work throughout Beverly Hills, from the estate lots north of Sunset Boulevard to the original 1950s flats south of Santa Monica Boulevard. The hillside streets in 90210 have their own challenges, steep driveways, tight turnarounds, and garages built into slopes, and we’ve done enough jobs up there to know what to expect.
- Trousdale Estates
- The Beverly Hills Flats
- Beverly Hills Post Office
- Southwest Beverly Hills
- Beverly Crest
Service Area – Cities Near Beverly Hills
Onyx Garage Door Service covers Beverly Hills and the surrounding Westside communities. If you’re across the border, you can find our West Hollywood, CA page for service there, or see Culver City, CA and Hollywood, CA for coverage in those areas. We also serve Universal City, CA for hillside properties just over the pass.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Beverly Hills
Our shop is in South Gate, but we run service calls throughout Beverly Hills every week and have served the city since 2014. Response times follow traffic patterns, and we schedule around your timing, not ours.
Most like-for-like replacements don’t need a permit, but any change to the opening size, a first-time installation, or work on a historically designated property may need city review. We’ll tell you what applies to your specific address before any work is scheduled.
Yes, that’s most of what we do in Beverly Hills. Arched openings, oversized doors, decorative hardware, and solid wood construction are all within our scope, and we carry or order the specific parts those doors require. Call (877) 588-8251 for a free estimate on any garage door project in Beverly Hills.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— David Kim"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Sarah Schaefer"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Arjun Rao