Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Culver City, CA
Most garage door work in Culver City circles back to one thing: the age of the housing stock. Single-car garages built between 1950 and 1970 were framed for narrow openings, solid wood doors, and spring systems that have since outlived their design life by decades. When we install, replace, or repair those doors, we’re matching the original mid-century dimensions while bringing the hardware up to current safety and insulation standards. At Onyx Garage Door Service, we’ve handled Culver City garage doors since 2014, and we work on every major brand homeowners already own: LiftMaster, Chamberlain, Genie, Clopay, and more. For a free estimate on garage door installation or repair, call (877) 588-8251.
Why Culver City Homes Are Different
Culver City’s residential fabric is dominated by 1950s and 1960s ranch homes and mid-century modern tracts. Carlson Park, Sunkist Park, and the streets around Veterans Memorial Park are full of attached single-car garages that were built narrower than today’s standard widths. Many still carry their original wood sectional doors, and those doors are often 8 feet wide instead of the 9-foot opening common in newer construction. That matters when a homeowner calls us expecting a standard replacement: a stock door from a big-box store won’t fit, and the city’s design review process in several neighborhoods means the replacement has to look like it belongs on the house.
The coastal marine layer and salt air from the west side create a second distinctive problem. Metal tracks, hinges, and torsion springs corrode faster here than they do ten miles inland. The damp air also works on wood doors, swelling panels and peeling older finishes. We adjust our recommendations accordingly: galvanized or powder-coated hardware on replacements, and door materials that hold up to persistent moisture without warping. Culver City homeowners don’t need a garage door company that treats every job the same. They need one that understands what these particular houses ask for. We do.
Styles & brands we work with
Our Main Culver City Services
Two jobs account for the majority of calls we get from Culver City homeowners: repair work on aging doors and hardware, and opener issues on systems that have finally given out. Both are outlined below, with dedicated pages for full detail.
Garage Door Repair in Culver City
Most repair calls in Culver City come from garages built in the mid-century boom, meaning original wood doors, older spring configurations, and hardware that has seen decades of damp coastal air. Springs snap, cables fray, rollers wear flat, and tracks drift out of alignment. When we repair these systems, we carry brand-specific parts for Clopay, Amarr, Wayne Dalton, and others, so the fix is matched to the door, not improvised on site. Rust near the coast means we often replace hardware in pairs rather than chasing one component at a time. For the full breakdown of what we repair and how fast we can get there, see Garage Door Repair in Culver City.
Garage Door Opener Repair in Culver City
Opener failures in Culver City follow predictable patterns: older chain-drive units from the 1990s and early 2000s have worn gears or dead logic boards, and salt air can corrode the traveler and rail. We diagnose LiftMaster, Chamberlain, Genie, and Craftsman openers down to the component level before quoting anything. Sometimes it’s a capacitor; sometimes the motor itself is done. Either way, you’ll know the exact cost before we start. Read the full scope and our approach on Garage Door Opener Repair in Culver City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Culver City
Garage door installation in Culver City usually means one of two situations: a homeowner in a 1950s or 60s ranch home replacing an original wood door, or someone with newer infill construction who wants a modern roll-up with better insulation and quieter hardware. In the first case, the opening is often narrower than current standard sizes, and the replacement has to respect the home’s design character. In the second, we’re typically matching a door to a mixed-use or multi-unit building where noise control and durability matter. We handle both, with a full range of options across Garage Door Installation services.
Garage Door Replacement
Replacing a worn or failed door on a Culver City home often means sizing a custom door for an opening that hasn’t been standard for 60 years.
Signs you need it
The door is sagging, panels are rotted or split, the wood has warped out of square, or the current door simply no longer seals against the night air or street noise.
What it costs in Culver City
A new residential garage door in Culver City typically runs $700 to $2,200 depending on width, material, and insulation level, with most mid-century homes falling between $900 and $1,600.
How we do it
We measure the actual opening, verify track and hardware condition, order the correctly sized door, remove the old unit, and install the new door with aligned tracks, balanced springs, and clean trim work.
Garage Door Installation Service
Full new-system installation that covers the door, the mechanical hardware, and when needed, a new opener, so one crew handles everything from sheet metal to sensors.
Signs you need it
You’re adding a garage door where none exists, converting a carport, or the existing door and hardware are compromised enough that a piecemeal repair would cost more than starting fresh.
What it costs in Culver City
Installation labor for a new garage door in Culver City ranges from $250 to $550 for the opener and standard setup, plus the door itself, which runs $700 to $2,200.
How we do it
We confirm the framing dimensions, recommend a door rated for Culver City’s damp coastal air, install the track and spring assembly, mount and program the opener, and run a full safety-reversal test before we leave.
Commercial Garage Door Installation
Culver City’s mixed-use developments and light commercial buildings need doors that cycle reliably under heavy daily use, and we spec and install them the same way we do residential work: correctly, without cutting corners.
Signs you need it
Your current commercial door binds on the tracks, the bottom seal doesn’t meet the slab, or the door hasn’t been code-compliant for the building’s type of use.
What it costs in Culver City
Commercial door installation in Culver City falls inside the same $700 to $2,200 range for standard roll-up units, with wider or higher-cycle doors quoted per the opening.
How we do it
We evaluate the opening and usage pattern, order a door rated for the daily cycle count, install it with reinforced tracks and balanced springs, and test the full travel and balance.
Garage Door Installation Contractors
Culver City permits and design review can add steps to a garage door project, and we’re familiar with what the city asks for on residential replacements and additions.
Signs you need it
You’re planning a remodel, addition, or ADU in Culver City and need a garage door contractor who understands local code and design guidelines.
What it costs in Culver City
Our installation contractor work is billed within the same $700 to $2,200 per door plus $250 to $550 for opener installation, with a written quote before any work begins.
How we do it
We coordinate with your project timeline, pull the necessary measurements early, and install the door to the rough opening spec your design calls for, with all hardware matched to the building’s use.
Garage Door Seal Installation
Culver City’s damp air and occasional heavy marine fog make the bottom seal and weatherstripping more than a comfort item: they’re how you keep moist air, dust, and pests out of the garage.
Signs you need it
You can see daylight under the door, the rubber along the bottom has cracked or gone brittle, or the door lets in a steady stream of damp air after a foggy night.
What it costs in Culver City
Seal installation is included as part of a full door install, and for standalone work we quote within the $110 to $220 range typical of roller and component replacement.
How we do it
We remove the old seal, clean the channel, cut the new seal to the exact door width, and secure it so it compresses evenly when the door closes.
What Garage Door Installation Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| New garage door | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
Most Culver City installations land between $900 and $1,600 for a replacement door, with the opener quoted separately. The exact price is agreed before any work starts, so there is no surprise at the end.
Can you install a garage door that matches a mid-century Culver City home?
Yes. We work with brands and materials that fit the original character of ranch and mid-century homes, including wood-look steel and custom-width doors that match narrower 1950s openings. The result is a door that looks like it belongs on the house and performs like a modern system. Call (877) 588-8251 for a free measure and quote.
How long does a garage door installation take in Culver City?
Most standard residential installations are finished in a single visit, usually 4 to 6 hours for a full door-plus-opener setup. Custom-width doors may take a few days longer for manufacturing. We schedule Culver City work throughout the week and confirm the exact timeline when we quote.
Brands We Service in Culver City
Most Culver City garages carry one of a handful of brands, and we stock parts locally for the ones we see most: LiftMaster, Chamberlain, Genie, and Clopay. That means faster diagnosis, correct parts on the truck, and no trial-and-error fixes. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| Garage door repair (general) | $150 – $600 |
Two things push prices toward the high end in Culver City: the need for custom-width doors on the older single-car garages, and corrosion from the marine layer that forces more hardware replacement than a like-for-like fix would require inland. Whatever the job, the cost is quoted and agreed up front, before our crew touches the door.
Neighborhoods We Serve in Culver City
We cover all four Culver City ZIP codes: 90230, 90231, 90232, and 90233. That includes the neighborhoods where original mid-century doors are most common and the newer infill areas where roll-up doors are the standard.
- Carlson Park
- Sunkist Park
- Blanco-Culver Crest
- Studio Estates
- Veterans Park
For repairs, we typically reach any Culver City address within an hour on a weekday, and we route installs and replacements by appointment.
Service Area – Cities Near Culver City
Culver City sits at the center of a dense patch of neighborhoods we serve regularly. For work just to the north, see Ladera Heights, CA. To the northwest, Beverly Hills, CA has its own page. We also cover View Park-Windsor Hills, CA and West Hollywood, CA for repairs and installations alike. If you’re in Culver City proper, call (877) 588-8251 and we’ll handle the rest.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Culver City
Yes. We serve every Culver City ZIP code: 90230, 90231, 90232, and 90233. Our technicians know the difference between the older single-car garages in Carlson Park and the newer mixed-use buildings downtown, which means we arrive with the right parts for the house we’re visiting.
Some Culver City neighborhoods have design review requirements that can affect door style and materials, especially for mid-century homes. We’re familiar with those guidelines and can advise on what your project needs before you commit. Permits are not always required for like-for-like replacements, but we’ll tell you plainly what applies to your street.
Yes. If your HOA requires a specific door style, color, or material, we work within those rules. We always recommend confirming the HOA’s architectural standards before ordering a door, and we’ll provide the specs your board needs to approve the project.
If you need garage door installation, repair, or opener work in Culver City, call Onyx Garage Door Service at (877) 588-8251 for a free estimate. We’ve served Culver City since 2014, and we’ll give you a straight answer on your door, your opener, and what it takes to fix it right.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Jamal Nash"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— David Kim"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Sarah Schaefer