Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Glendale, CA
Garage door installation in Glendale means working with homes that were built into hillsides, not just on them. We replace and install doors on 1950s tract houses with non-standard openings, 1920s Spanish Colonials with original wood framing, and hillside properties in Chevy Chase and Glenoaks Canyon where low headroom rules out conventional track systems. Onyx Garage Door Service has served Glendale since 2014, and our technicians know which setups work on steep grades and which ones don’t. Call (877) 588-8251 for a free estimate on any door or opener job.
Why Glendale Homes Are Different
Glendale’s garage door work is shaped by its hillside topography and the 1950s-60s tract homes built into those slopes. Narrow, steep driveways and tight turnarounds make standard door sizes and track configurations impractical in much of the city. Technicians here regularly deal with custom-width doors and reinforced tracks to handle the grade changes and seismic movement unique to the Verdugo Mountains foothills.
The housing stock compounds this. Most of Glendale’s single-family homes were built between 1945 and 1970 with attached garages, and many retain their original wood or early steel doors. In neighborhoods like Adams Hill and Rossmoyne, the 1920s and 30s Spanish Colonial and Craftsman homes often have garage openings that match no modern standard size. That means replacement work here is rarely a simple swap; it requires measuring, ordering, and often custom-cutting sections to fit.
Climate matters too. Glendale’s hot, dry summers and Santa Ana wind events put extra stress on springs and opener gears, while seismic activity makes annual track alignment and mounting reinforcement checks a sensible habit. A door that works fine in a flatland city can bind, sag, or jump its track on a Glendale hillside within a season if those factors are ignored.
Styles & brands we work with
Our Main Glendale Services
Most Glendale homeowners call us for two things: a door that will not open, and an opener that will not respond. Here is how each works in this city specifically.
Garage Door Repair in Glendale
Repair work in Glendale often starts with a door that was never right for its location: a standard track on a sloped driveway, a spring rated for a lighter door, or rollers worn out by years of fighting grade changes. Our technicians diagnose the whole system, then replace or realign what actually failed, which on hillside homes frequently means reinforcing the track rather than just swapping a part. We see more spring failures in the Adams Hill and Rossmoyne areas than in the flatlands, largely because those older doors run heavier than their original hardware anticipated. One call covers the door, the tracks, and the hardware. Garage Door Repair in Glendale is available for same-day service in most cases.
Garage Door Opener Repair in Glendale
Opener failures in Glendale often trace back to the load the motor is being asked to move. A door that has grown stiff from heat, dust, and misaligned tracks forces the opener to work harder, and the opener usually fails first. We repair openers from LiftMaster, Chamberlain, Genie, and Craftsman, which covers the majority of systems found in Glendale garages. In hillside neighborhoods like Glenoaks Canyon, side-mount openers are common because headroom is minimal, so our technicians carry the parts and programming knowledge for those units rather than trying to retrofit a rail-style opener where it won’t fit. Garage Door Opener Repair in Glendale includes testing the door’s balance and travel before we consider the job done, because an opener that burned out once will burn out again if the door underneath it is the actual problem.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Glendale
Garage door installation in Glendale almost always involves fitting a new door into an opening that was not built to modern dimensions. Homes from the 1945-1970 building boom, plus the older Spanish Colonial and Craftsman stock in Adams Hill and Rossmoyne, frequently have openings that are a few inches narrower, shorter, or taller than today’s catalog sizes. Add the hillside factor in Chevy Chase and Glenoaks Canyon, where low headroom forces a low-clearance track or side-mount opener, and installation here is a measuring-and-fitting job more than a lift-and-drop one. Onyx Garage Door Service has served Glendale since 2014, and we treat every installation as a custom fit, not a stock replacement. Our full Garage Door Installation process is built around that reality.
Garage Door Replacement
Signs you need it
Your door has visible rot or rust through the panels, it has pulled away from its track more than once, or you are repeatedly paying for repairs on a door that is original to the house.
What it costs in Glendale
New door installation in Glendale typically runs $700 – $2200, with custom-width doors for non-standard openings landing on the upper end.
How we do it
We measure the opening and headroom, order or cut sections to fit, remove the old door and hardware, install the new door with tracks matched to the grade, and balance the system before testing the full cycle.
Garage Door Installation Service
Signs you need it
You are building new or remodeling, you want a door that matches a new exterior style, or the existing opening has never held a door that operates smoothly.
What it costs in Glendale
Full installation service in Glendale, including labor, hardware, and weatherseal, typically falls within $700 – $2200 depending on door size and track configuration.
How we do it
We confirm the opening dimensions and headroom, recommend the right door weight and track style for the slope, install and anchor everything to seismic standards, and program any new opener to pair with it.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, water puddles at the base during winter rain, or leaves and dust blow in during Santa Ana wind events.
What it costs in Glendale
Seal replacement is a smaller job, and most Glendale homeowners pay within the $130 – $250 range we quote for hardware and fitting time on a typical single door.
How we do it
We pull the old bottom seal and side trim, fit a new seal sized to the door and floor grade, and adjust the door’s travel so it compresses the seal without binding on the concrete.
What Garage Door Installation Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| New door installation | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Track realignment or replacement prep | $120 – $240 |
These figures reflect what we quote on Glendale jobs when the opening is standard and the track can be reused. Custom-width doors, low-clearance track systems, and seismic anchoring add cost because they add material and time.
How long does garage door installation take in Glendale?
Most single-door installations finish in one day. Homes with non-standard openings, low-headroom track requirements, or older framing that needs reinforcement can stretch into a second morning, and we will tell you which category yours falls into before we start.
Do I need a permit to replace a garage door in Glendale?
For a straight replacement with no structural changes, usually not. If the opening is being enlarged, reframed, or if your home is in a historic district with specific design rules, the picture changes, and we can advise you on what the city will ask for.
Brands We Service in Glendale
We work on your brand, not just our preferred one. Onyx technicians are trained across LiftMaster, Chamberlain, Genie, and Clopay systems, which covers the majority of doors and openers found in Glendale garages. We stock common parts locally for those brands, which means most repair work ships from a van, not a warehouse. Our brands page details the full list of systems we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
Prices in Glendale push toward the higher end of these ranges when the home sits on a hillside lot with a steep driveway, when the opening is a non-standard size from a pre-1970 build, or when low headroom forces a low-clearance track or side-mount opener. The price we quote is the price you pay; we confirm the number before any work starts and do not add charges once the door is apart.
Neighborhoods We Serve in Glendale
Our vans cover Glendale daily, from the flatland grid around downtown to the canyon and ridge streets north of the 134. Response time across the city is typically same-day for repair calls and within the week for measured installation work.
- Adams Hill
- Rossmoyne
- Chevy Chase
- Glenoaks Canyon
Service Area – Cities Near Glendale
Onyx Garage Door Service works throughout Glendale and the surrounding LA foothill and central neighborhoods. If you are in Echo Park, CA, Silver Lake, CA, Hollywood, CA, or Universal City, CA, we cover your area too. Same Glendale-standard service, same upfront pricing.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Glendale
Yes, we serve the entire city including the 91207, 91208, 91209, and 91210 ZIP codes. Hillside streets north of the 134 are a regular route for us, and we schedule installations there just as often as repairs.
For repair calls, most Glendale addresses get same-day service when you call before early afternoon. Installation and replacement work is scheduled, typically within a few business days, because we measure first and order to fit.
No. We quote before any work starts, and the number we give you is the number on the invoice. If we find something unexpected, we stop and discuss it before proceeding, so there are no surprises at the end of the job.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Jamal Nash"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— David Kim"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Sarah Schaefer